Test/IT/Medical/Lab Equipment
|
|
|
|
*
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-MOUNT19
- Mounting plate for SIRIUS system into 19 inch Cabinet. Aluminum ground plate with easy click mechanism. Fits to SIRIUS, SBOX, DS-BP2.
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-MOUNT1
- Aluminum mounting plate for SIRIUS slice configurations. This allows the mount to be securely mounted to a structure and then the SIRIUS slices connected to the MOUNT. - *See updated item DS-MOUNT4*
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-MOUNT-R1-R2
- Bottom aluminum mounting plate for R1 or R2 units. This allows the mount to be securely mounted to a structure and then the unit connected to the MOUNT.
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-MOUNT-K3
- Mounting plate for a Krypton system features an aluminum ground plate with an easy click mechanism, which is the same as on the Krypton instruments. Please note that the mechanism is meant to sustain large vibrations for a single device.
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-MOUNT-K2
- Mounting plate for a Krypton system features an aluminum ground plate with an easy click mechanism, which is the same as on the Krypton instruments. Please note that the mechanism is NOT meant to sustain large vibrations and a huge stack of devices.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-LED-DISP-VGPS
- Bright, small, rugged LED display with 2 m cable to DS-VGPS-HS/HSC sensor indicating Speed, heading, height or time together with number of satellites. - Only works with DS-VGPS-HS, DS-VGPS-HSC, DS-IMU1, DSIMU2, SBOX with 100Hz GPS.
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-IRIG-CLOCK-R3
- IRIG clock input on BNC connector for synchronization,supported modes: IRIG A, B in AC and DC mode. - *For installation inside R3 units*
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-IRIG-CLOCK
- IRIG synchronized clock - Frequency range: 10 Hz to 10 MHz - Clock accuracy IRIG locked: without drift - Clock accuracy IRIG unlocked: < 1 ppm, - Input: IRIG code A or B, AM or DC, - occupies one USB interface, - requires DEWESOFT-x-PROF
|
|
|
|
*
|
|
|
DEWESoft, LLC DS-IRIG-ACDC
- Clock source - converts analog IRIG AC or AM Signal to digital IRIG DC Signal. - - Fits to all DEWESOFT devices. - - Includes power supply - *For installation inside R3 unit use DS-IRIG-CLOCK-R3.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*
|
|
|
|